Medical Gas Manifold

Medical Gas Manifold in the hospital mainly used in oxygen, nitrous oxide, carbon dioxide and other gases, which belong to the high-voltage equipment, it is the role of high-pressure gas pipeline through the decompression device and a relatively stable pressure delivery to the gas terminal, the general convergence Pai, including fully automatic, semi-automatic and manual are three types:
1, automatic-bus:
For two-way air and toggle between automatic design, applied to bottled gas
With decompression device and discharge excess pressure device to ensure stable output pressure and the use of safety
With a bottle-for-sound and light alarm function and long-range pressure alarm function, simple and reliable
Direct pressure on the table, which could indicate clearly on both sides of the cylinder pressure and the export value of total exports pressure
With gas filter can effectively block the gas of impurities
Input Voltage: 220V, 50HZ, state power can still work
After pressure testing the entire system, safe and reliable, and the Peoples Republic of Medical Devices Registration
The application of gas: oxygen, nitrous oxide, nitrogen, carbon dioxide
China in line with the Q / SVDQ 01-2005 and international standards IEC 601-4 (Medical system) standard
2, hand-bus:
Manually switch on both sides of the gas supply source for bottled gas
Convergence using high-quality copper pipe processing system is pressure tested, safe and reliable
Pipeline connecting the use Silver solder, which can effectively prevent leakage
Gantry structure, easy to install
There overpressure emission devices, to ensure that the use of safety
With gas filter can effectively block the gas of impurities
There are a variety of connectivity options, commonly used include: 3,2 * 2 * 10 * 5,2, etc.
The application of gas: oxygen, nitrous oxide, nitrogen, carbon dioxide
3, bus-style semi-automatic:
By way of pneumatic switch on both sides of the gas supply source for bottled gas
Every time after the switch needs to re-adjust the location of pneumatic components, in order to meet the next pneumatic switch, so called semi-automatic.